AEV Bison - Disassembly; Remove Front Bumper and Skid Plates

1
AMERICAN EXPEDITION VEHICLES
I. DISASSEMBLY
1. Disconnect and isolate the negative battery cable.
2. Remove Front Bumper Skid.
A. Remove the 4 M4 torx screws attaching the license plate bracket (fig. 1).
B. Remove the 2 M10 bolts in middle of Front Bumper Skid (fig. 2).
C. Remove the 4 torx bolts from bottom and sides of Front Bumper Skid (fig. 2).
Figure 1 Figure 2
3. Remove Skid 1B by removing the 6 bolts (fig. 3).
Figure 3