2 - 28 Operating instructions EN ◼ IRG1-S ◼ 17.02.2024 ◼ Version 3.0
Dear Customer
Thank you for choosing our products and placing your trust and confidence in
our company!
This software manual contains all essential information you need about your
product. Our aim is to provide the required information as concisely and clearly
as possible. If, however, you still have any questions on the contents or
suggestions, please do not hesitate to contact us. We are always grateful for
any feedback.
Our team will also be glad to answer any further question you may have
regarding the controller or other options.
We wish you every success with our products!
With kind regards
Your Afag team
© Subject to modifications
The controllers have been designed by Afag GmbH according to the state of the
art. Due to the constant technical development and improvement of our
products, we reserve the right to make technical changes at any time.
Updates of our documentations
Unlike the printed documents, our digital instructions manuals, product data
sheets and catalogues are being continuously updated on our website.
Please keep in mind that the digital documents on our website are always the
latest versions.
© Copyright 2024 Afag GmbH
All contents of the present operating and installation instructions, in particular
the texts, photographs, and graphics, are protected by copyright. All rights
reserved. No part of these assembly and operating instructions may be
reproduced, distributed (made available to third parties), or transmitted in any
form or by any means, including photocopying, recording, or other electronic or
mechanical methods, without the prior written permission of Afag GmbH.
Afag GmbH
Wernher-von-Braun Street 1
D-92224 Amberg (Germany)
Tel.: +49 (0) 9621 65 027-0
e-mail: sales@afag.com
Internet: www.afag.com
Afag Automation AG
Luzernstrasse 32
CH-6144 Zell (Switzerland)
Tel.: +41 62 959 86 86
e-mail: sales@afag.com
Internet: www.afag.com
To Next Page
