Aficio MP W2400 - User Manual

1
Safety Information for Aficio MP W2400/Aficio MP W3600
Introduction
Read this manual carefully before using the machine. Keep this manual in a handy place for quick reference.
Important
Contents of this manual are subject to change without prior notice. In no event will the company be liable for
direct, indirect, special, incidental, or consequential damages as a result of handling or operating the machine.
Notes:
Some illustrations in this manual might be slightly different from the machine.
Certain options might not be available in some countries. For details, please contact your local dealer.
Depending on which country you are in, certain units may be optional. For details, please contact your
local dealer.
Operator Safety
This machine contains LED Array in scanner and writing units.
The machine is considered a class 1 LED device, safe for both office and EDP use.
Notes:
The model names of the machines do not appear in the following pages. Check the type of your ma-
chine before reading this manual. (For details, see “Machine Types”, About This Machine.)
• Type 1: Aficio MP W2400
• Type 2: Aficio MP W3600
Certain types might not be available in some countries. For details, please contact your local dealer.
Two kinds of size notation are employed in this manual. With this machine refer to the metric version.
For good copy quality, Ricoh recommends that you use genuine Ricoh toner.
Ricoh shall not be responsible for any damage or expense that might result from the use of parts other
than genuine Ricoh parts with your Ricoh office products.
Power Source
220 - 240V, 50/60Hz, 10A or more
Please be sure to connect the power cord to a power source as above. For details about power source,
see Troubleshooting.
NeptuneC2_Safety_Ricoh_F-GB_FM_forPaper.book Page 1 Wednesday, December 27, 2006 5:44 PM

Summary

Introduction and General Information

Manual Usage and Important Notes

Guidance on reading the manual carefully and notes on content changes and company liability.

Operator Safety Information

Details on the machine's LED device classification and operator safety guidelines.

Machine Model Identification

Instructions to check machine type (Aficio MP W2400/W3600) before reading.

Power Source Requirements

Specifies the required power source voltage, frequency, and amperage for the machine.

Safety During Operation

Hazard Symbol Definitions

Explains the meaning of WARNING and CAUTION symbols indicating potential hazards.

Electrical Safety Precautions

Instructions on handling power cords, avoiding electric shock, and connecting to power.

Environmental and Material Safety

Guidelines on keeping the machine away from flammable materials and proper toner disposal.

Machine Handling and Placement

Advice on avoiding dampness, lifting the machine, and placing it on stable surfaces.

Toner Handling and First Aid

Precautions for handling toner, including first aid measures for contact or ingestion.

Specific Operational Safety Warnings

Toner Contact and Cleaning

Advice on avoiding toner contact with skin/clothes and cleaning methods for stains.

Internal Machine Hazards

Warnings about internal components like lamps and cutter blades, and dust accumulation.

Paper Roll and Tray Handling

Instructions for safely handling paper rolls and loading/unloading paper trays.

Label Locations and Hot Surface Warnings

Label Identification and Hot Surface Warnings

Identifies warning labels on machine parts and warns of hot surfaces requiring caution.

Specific Hot Surface Labels (1-3)

Details warnings for hot surfaces indicated by labels 1, 2, and 3 on the machine.

Additional Label Information

Hot Surface Warnings (Labels 4-7)

Provides warnings for hot surfaces indicated by labels 4, 5, 6, and 7.

Machine Component Warnings

Hot Surface Warnings (Labels 8-9)

Details warnings for hot surfaces indicated by labels 8 and 9 on the machine.

Cutter Blade and Paper Roll Handling

Warnings about internal cutter blades and safe handling of paper rolls.

Final Safety Instructions

Hot Surface Warnings (Label 13)

Indicates hot surfaces with label 13 and advises caution.

Paper Tray Handling Precautions

Instructions for safely pulling out the cut paper tray with both hands.

User Information on Equipment Disposal

Recycling and Disposal for EU Users

Information on product recycling and disposal methods for EU, Switzerland, and Norway.

Disposal for Other Users

Guidance for users outside the EU on how to discard the product.

Noise Emission Information

Sound Power and Pressure Levels

Details sound power and sound pressure levels for stand-by and copying modes.

Regulatory Compliance and Symbols

Power Switch Symbol Definitions

Explains symbols for power switch (ON/STAND BY) and heater switch (ON/OFF).

Declaration of Conformity (EEA)

States compliance with EU directives for radio equipment and telecommunications terminals.

Aficio MP W2400 Specifications

General

Print Technology	Laser
Warm-up time	Less than 120 seconds
Power source	220-240V, 50/60Hz
Duplex Printing	Manual
Maximum Paper Size	A0
Scan Resolution	600 dpi
Type	Wide Format
Connectivity	Ethernet, USB 2.0
Operating System Compatibility	Windows, Mac
Paper size	A4