February 27, 2003
Afi-lite User Manual
29
Chapter 6: Troubleshooting
The Afi-lite milk meter is equipped with alerts to advise milkers of problematic
situations. There are two kinds of alerts:
• Premature cluster removal alerts.
• Operational fault alerts (error alerts).
Premature Cluster Removal Alert
A cluster can become detached before the end of milking. Premature cluster
removal is indicated by a flashing display of milk yield. If the milk yield flashes
after removal, check expected milk yield (press and ) as
well as expected conductivity ( and ) to identify the
problem.
To continue milking from the previous milk measurement:
1. Press .
2. Reattach the cluster.
Error Alerts
Error alerts flash in the display panel of the milk meter. They alert milkers to
Afi-lite operational faults.
Error Alert
indicates an overloaded or short circuit in one of the Afi-lite outputs.
When an error occurs, appears in the display panel and alternates
with a notation that indicates the faulty output. The notation is made up of the
word followed by the number of the output, where there is a malfunction.
Notations of malfunctioning outputs, and respective functions, (in the default
configuration) are listed below:
Notation
Displayed
Faulty Output
Milk valve solenoid (in milk meter body)
To Next Page
Loading...
Need help?
General
