What to do if my AFINOX Chiller shows an overheated condenser alarm?
If your AFINOX Chiller displays an overheated condenser alarm, switch off the control panel, wait for 10 minutes, and then switch it back on. If the condenser temperature remains higher than the set point after reactivation, disconnect the power supply and clean the condenser. If the alarm continues, contact technical support.
What to do if my AFINOX Chiller has a high temperature alarm?
If your AFINOX Chiller is showing a high temperature alarm, ensure the door hasn't been left open and that the room temperature isn't excessively high, for example, due to nearby hot appliances. If the alarm continues, contact technical support.
What to do if my AFINOX Chiller has a door switch alarm?
If your AFINOX Chiller is showing a door switch alarm, make sure that the door has not been left open. If the alarm persists, contact technical support.
Essential safety instructions for qualified installers, covering hazards and responsibilities.
Guidelines for safe appliance usage, including reading manual and proper handling.
Detailed breakdown of potential dangers associated with appliance operation and components.
Explanation of safety and information symbols used throughout the manual for clarity.
Key for understanding different appliance models and their features based on codes.
Detailed specifications for the ENERGY control panel, including connections and power.
Detailed specifications for the ARTIC/FROSTY control panel, including connections and power.
Verifying appliance integrity and absence of transport damage before installation.
Instructions for safe and correct transportation of the appliance to its installation location.
Procedure for safely removing protective films and disposing of them properly.
Specifications for the installation room, including floor, ventilation, and environmental conditions.
Required distances from walls, hot appliances, and for access to connections.
Instructions on placing the appliance on the floor and ensuring it is perfectly level.
Mandatory safety rules for electrical connection, including earthing and switch requirements.
Detailed steps for connecting the appliance to the electrical grid via a suitable socket.
Instructions for installing the drain siphon and pipe to correctly evacuate condensation water.
Details on equipping the appliance with a system to drain defrosting water to an evacuation point.
Step-by-step guide for rotating the door to change opening direction for better access.
Explanation of the data found on the appliance's rating plate for maintenance and repair purposes.
Checklist to confirm correct installation and initial operation before regular use.
Introduction to the appliance's purpose and basic operating temperatures for fresh and frozen food.
Guidelines for properly placing food containers to ensure optimal air circulation and avoid overloading.
Detailed explanation of the ENERGY control panel's functions, buttons, and display indicators.
Overview of the control panel's display, keys, and operating states (on, standby, off).
Instructions for locking or unlocking the control panel keypad to prevent accidental changes.
Procedure for adjusting the desired internal temperature of the appliance using the control panel.
How to activate the Overcooling function for rapid cooling of large food quantities.
Steps to manually initiate the defrosting cycle for the appliance when needed.
How to set and change the appliance's humidity operating mode between high and low.
Instructions for activating the air and ozone mix cycle to eliminate odours and bacteria.
How to view the total operating hours of the compressor, useful for maintenance scheduling.
Procedure to display the current temperatures of the evaporator and condenser units.
Information on how the appliance logs HACCP alarms, including critical values, duration, and type.
Guidance on identifying and resolving common alarms and errors, including HACCP and system alerts.
Troubleshooting steps for low/high temperature and door switch alarms based on HACCP logs.
Steps to resolve issues related to cell, evaporator, or condenser probe errors.
Troubleshooting advice for overheated condenser or locked compressor alarms.
Essential safety steps before performing any maintenance, including disconnecting power and using PPE.
Instructions for cleaning steel surfaces, interior cell, control panel, condenser, and glass door.
Method for cleaning the appliance's external steel surfaces using appropriate detergents.
Daily cleaning instructions for the appliance's internal cell to maintain hygiene and performance.
Guidance on cleaning the control panel display and buttons safely without damaging the screen.
Instructions for accessing and cleaning the condenser fan and water tray for optimal cooling.
Method for cleaning the glass door using a soft cloth and avoiding abrasive materials.
Steps to take when the appliance is not in use, including power disconnection and protection.
Information on how to safely and legally dispose of the appliance and its components.
Specific instructions for disposing of WEEE appliances in Italy via collection centers or dealers.
General guidance for disposing of WEEE appliances in EU countries by contacting local authorities.
List of materials used in appliance construction, including stainless steel, plastic, gas, oil, and copper.
Information on contacting the after-sales service, warranty, and required data for support.
General| Brand | AFINOX |
|---|---|
| Model | 700 LT PC INC |
| Category | Accessories |
| Language | English |
To Next Page