QUICK START
AfterShokz Loop100 USB-A Bluetooth® Adapter
Model: CL101A
*Compatible products: OpenComm, OpenComm UC
Pairing
1. Start with OpenComm turned off. Press and hold the Volume+ button until the LED Indicator flashes red and blue.
2. Plug the USB adapter into a USB port on your PC. The LED will flash blue rapidly.
3. Connection is established when Audrey says "Connected" or beeps. The LED on the USB adapter is solid blue.
4. To play music or take calls on the headset, please check, and ensure the “AfterShokz Loop100” is the default input and output devices in
your operating system’s audio settings.
Multifunction Button (Designer will put the chart into graphic presentation)
Multifunction Button LED
Function Action LED
Pair to a headset Press and hold for 2 seconds Flashes blue rapidly
Reconnect to the last connected
headset
Click once Flashes blue every second
Reset the adapter Press and hold for 2 seconds, then
double-click
Flashes blue then turns solid blue for
5 seconds, then flashes blue rapidly
To Next Page
Need help?
General
