Need help?Do you have a question about the Aftershokz OPENCOMM and is the answer not in the manual?
Charge the headset using the magnetic induction cable. The LED indicator changes from red to blue upon completion.
Enter pairing mode by holding the volume+ button until OpenComm indicates 'pairing' and the LED flashes red and blue.
Open your device's Bluetooth menu and select 'OpenComm by AfterShokz' to connect.
Control music playback with single, double, and triple clicks for play/pause, next, and previous.
Manage calls with single clicks to answer/end, and holds to manage waiting calls or reject.
Activate voice assistant or redial the last number using specific button presses.
Instructions for powering the headset on and off.
Control volume, mute, and switch EQ settings for an optimal listening experience.
Check the headset's battery level by pressing the volume buttons.
Solid red indicates charging; solid blue indicates charging complete.
Flashes indicate pairing mode, incoming calls, or low battery.
General| Type | Bone conduction |
|---|---|
| Charging Time | 2 hours |
| Water Resistance | IP55 |
| Warranty | 2 years |
| Microphone | Boom microphone |
| Bluetooth Version | Bluetooth 5.1 |
| Battery Life | Up to 16 hours |
| Compatibility | Bluetooth-enabled devices |
| Weight | 33 grams |
To Next Page
