Need help?Do you have a question about the AG-NAV Guia Platinum and is the answer not in the manual?
Allows users to enter and save details for each application for post-flight review.
Allows users to define the width of each swath section for optimal spray coverage.
Provides methods for generating new areas for application, including AB line use.
Enables selection of existing area files (AgNav, shape, KML/KMZ) for application.
Details how to manage and load obstacle files to enhance pilot safety during flight.
Explains how to use cross-country waypoints for navigation to destinations or work locations.
Supports Variable Rate Technology (VRT) by using prescription files for application rates.
Defines how new areas are generated and the spray patterns to be used.
Allows selection of previously created area files (*.no1, *.prj, *.shp) for flying.
Provides instructions on how to use cross-country waypoints for guidance.
Allows editing the coordinates of corners for existing or new spray area files.
Details how to add, edit, or delete obstacles to enhance pilot safety during flight.
Configures parameters for spraying, including units, swath, and auto-advance.
Configures settings related to pilot safety, including obstacle and proximity alerts.
Sets parameters for guidance calculations and display on the lightbar and screen.
Configures settings for granular flow controllers, including material and calibration.
Enables optimization of aerial application by calculating and applying wind drift offset.
Details the process of copying variable rate prescription files to the Platinum system.
Explains how to select a prescription file for application and configure its settings.
To Next Page
General