2. To rewind t
cable with the other hand to ensure that it does not whip causing damage.
3. Power Control : Spin the On/Off switch(Electronic Power Control) knob to control the
the cleaner.
MAINTENANCE
1. Emptying the dust compartment subassembly
Always operate the cleaner with the dust compartment subassembly
whole installed.
If you forget to attach HEPA and filter or attach them in the wrong manner, the
dust compartment subassembly may not rinse.
2. Cleaning and changing filter, HEPA and sponge
Filter and songe for air-inlet should be cleaned at least twice a year or when it becomes
visible solid.
Clean HEPA for air-inlet when you find it is filled in.
HEPA for air-inlet and filter for air-outlet are changeable.
Always operate the cleaner with filters and sponge installed.Otherwise, reduced suction
or motor damage may be result.
Disconnect from electrical outlet, before cleaning filter.
Do not use a washing machine to rinse filter.
Do not use hair drier to dry it.
To Next Page
Loading...
Need help?
General