Assembly Instructions
Step 5:
Step 6:
Page 15 of 27
Important: The frame is held together
under tension so you will have to use
some force to insert certain parts.
Place one foot on the top tube and grip
the leg extension with both hands.
Pull the extension until it can be slotted
into the T-connector (1).
Slot the end of leg extension into the
T-connector (2).
Push down on the end of the leg
center to fully insert the leg extension
into the T-Connector.
You have now completed the first
frame section.
Repeat the last six steps until you
have assembled the remaining six
sections of the trampolines frame.
To Next Page
Loading...
