Assembly Instructions
Step 7:
Step 8:
Page 16 of 27
This step will require 2 people who
must be wearing gloves and protective
eyewear.
Slot two of the frame section together
as shown in the diagram.
Whilst one person holds the
assembled sections upright, the other
person can slot a third section onto
the end of the assembled sections.
Repeat for remaining four sections.
You will now need to slot the frame
together. This will take some force. The
easiest method is if the two people face
each other.
Hold the top tubes either side of the
T-Connectors and push towards each
other until the loose end of the frame
can be inserted into the T-Connector.
Important: Ensure all of the top tubes,
leg extensions, and center legs are fully
inserted.
The frame is now fully assembled.
To Next Page
Loading...
