CARE & MAINTENANCE INSTRUCTIONS
Inspect all nuts and bolts twice monthly during the usage season for tightness and tighten as
required. It is particularly important that this procedure is followed at the beginning of each season.
Sand rusted areas on metal tubing and repaint using a nonleaded-based paint meeting the
requirements of Title 16 CFR Part 1303.
Check all coverings for bolts and sharp edges twice monthly during usage season to be certain that they
are in place and replace when necessary. It is especially important to do this at the beginning of each
new season.
Do not use when the temperature drops below 32 degrees F (0 degrees C); remove and store the
plastic slides indoors.
Owners shall be responsible for maintaining the legibility of the warning labels.
DISPOSAL INSTRUCTIONS
Please use care when disassembling the equipment when it is no longer in operational condition.
Wear heavy duty working gloves to avoid injuries.
Fully disassemble the entire play set before disposal. Do not leave partially disassembled parts in
areas accessible by children.
Should you wish to recycle the steel tubing, please take the frame to your local recycling center.
All plastic parts can be recycled, take it to your local recycling center. Do not let children play with any
disassembled parts meant for disposal, such as slide, tubing, bolts, nuts, screws, etc.
All rusted parts, bolts must be properly disposed of in trash bin. Do not reuse.
To Next Page
