This document is a manual for the AGARO Professional Blender, Model: Grand, Item no - 33555. It provides details on the product's components, safe usage, cleaning, functions, troubleshooting, and technical specifications, along with warranty information.
Function Description
The AGARO Professional Blender is designed for various blending tasks. It features a powerful motor and multiple speed settings to handle different ingredients and achieve desired consistencies. The blender includes a main blending cup with a lid, a steam cap, and a mixing cap. The control panel on the base unit allows users to manage power, speed, and pulse functions.
Key Functional Components:
- Steam Cap: A small cap on the lid, likely for releasing steam or adding ingredients during blending.
- Cup Cap: The main lid for the blending cup.
- Mixing Cap: A cap that fits into the steam cap, possibly for measuring or as an additional seal.
- Speed Control Knob: Allows adjustment between low and high speeds.
- Start Switch: Initiates the blending process. It has "ON" and "OFF" positions.
- Pulse Switch: Provides short bursts of blending power, returning to the "OFF" position automatically when released.
- Base Bottom: The main housing for the motor and controls.
- Rubber Feet: Provide stability and prevent the blender from sliding during operation.
- Cup Mat: A mat on the base where the blending cup sits, ensuring a secure fit.
Important Technical Specifications
- Model: Grand
- Item no: 33555
- Rated voltage: 220V-240V
- Rated frequency: 50-60Hz
- Rated power: 2000W
- Rated capacity: 2.0L
- Warranty: 2 Years (with an option for 3 months extended warranty upon registration)
Usage Features
The blender offers intuitive controls for ease of use:
- Start Switch:
- Preset to "OFF" before delivery.
- Turn to "ON" to start the product.
- Turn to "OFF" to stop the product.
- Pulse Switch:
- Preset to "OFF" before delivery.
- Turn to "ON" to run the product at full speed.
- Automatically returns to "OFF" when released, providing quick bursts for chopping or fine-tuning textures.
- Low/High Speed Switch:
- Preset to "Low Speed" before delivery.
- Turn to "Low Speed" to run the product at a lower speed.
- Turn to "High Speed" to run the product at a higher speed.
Safety Cautions for Usage:
- Do not insert metal objects (knives, forks, spoons, etc.) into the blending cup.
- When cleaning, do not clean the knife directly by hand; use appropriate cleaning tools and prioritize safety.
- Do not overfill the cup; contents should not exceed two-thirds of its capacity.
- Always ensure the lid is closed when using the blender.
- Before starting, confirm the cup is securely fixed on the base.
- Due to high horsepower, hold the cup slightly when starting the blender.
- If using a stirring bar, ensure the cup is covered while the motor is running.
- Do not use your hand to retrieve food from the cup due to the sharp blade.
- Remove the cup from the frame to pour out food.
- Be cautious when touching the switch before and after start-up.
- Utensils should not be immersed in water.
- Exercise care when handling cutting blades, especially when removing them from or emptying containment cups, and during cleaning.
Maintenance Features
The manual outlines specific methods for cleaning and maintaining the blender to ensure longevity and safe operation:
- Always unplug the blender before cleaning and maintenance.
- Cleaning the Cup and Lid: Carefully scrub the cup body and lid with a sponge or cloth and then dry them.
- Avoid Hand Contact with Blades: Do not put your hand into the cup for cleaning.
- Cleaning the Base Unit: Wipe the rotating shaft and motor base with a dry cloth. Important: Do not rinse the motor base with water.
- Stubborn Stains: For areas that are difficult to wipe clean, use a neutral lotion, then wipe with a dry cloth until clean.
Troubleshooting Guide:
The manual provides a fault analysis table for common issues:
- Indicator light is not on:
- Cause: Power cord not plugged in, or stirring cup and main engine not assembled properly.
- Exclusion Methods: Check power cord connection, ensure proper assembly of the mixing cup and main machine.
- Indicator Light On, Product Inoperative:
- Cause: Long working hours leading to motor overheat protection, or the machine itself is out of order.
- Exclusion Methods: Wait one hour before reusing. If the problem persists, send to after-sales service department.
For other troubles, users are advised to contact customer service or a designated repair point and not to dismantle or repair the machine themselves.
The AGARO Professional Blender comes with a 2-year warranty. Users can avail an additional 3 months extended warranty by registering their product within 30 days of purchase. Registration can be done by scanning a QR code or visiting www.agarolifestyle.com/product-registration. For warranty claims, customers must preserve the invoice. Online purchasers need to produce the Online Partner's Invoice copy.
Contact information for feedback, complaints, and customer care is provided:
- Universal Corporation Limited
- Address: 4/1 Middleton Street, Sikkim Commerce House, Kolkata-700071
- Email: info@uclindia.com
- Customer Care No: 9821-486-487
Need help?
To Next Page
General