How to use the accessories
1. Install nozzle tool and brush: Select crevice nozzle or brush and
insert at the suction end according to your cleaning need.
2. Connector tool: To be used to connect the multipurpose brush.
How to Use:
1. The power switch has two dierent positions. Slide the switch
button to "ON" to start the unit and "OFF" to switch OFF the unit.
a. Select the correct accessory and connect at the suction end. Switch
on the vacuum cleaner for cleaning and switch o after using it.
b. Use the upper hooker to wind the power cord during storage and
lower hooker to unwind the power cord during use.
1
OFF
ON
To Next Page
Loading...