Agaro REGAL PLUS - Troubleshooting; Power and Suction Issues; Dust Leakage

Problem
Power plug is not tted
Properly in the socket
No power
Power switch not working
Motor thermal protector
The main brush or
accessories block
Clear the blockage
Clear the dirt timely
Too much dust in lter
Filter is broken
Replace lter
Reinstall lter
Dust leak out from the VC
Clear lter
Low Suction
Filter is not installed on place
Reinsert in the plug
Check the circuit breaker
Press the switch of VC pull the
plug & wait for thermal protector
Solution
Problem Solution