Need help?Do you have a question about the AGCO Massey Ferguson 2604H and is the answer not in the manual?
General| Type | Tractor |
|---|---|
| Hydraulic System | Open center |
| Engine Type | diesel |
| Fuel Tank Capacity | 70 L |
| PTO Speed | 540 RPM |
Explains the manual's purpose, structure, and key terms for efficient tractor repair.
Defines DANGER, WARNING, CAUTION, IMPORTANT, and NOTE signals used in the manual.
Outlines basic safety situations and precautions for tractor repair operations.
Covers safety for clothing, eye, breathing, hand, foot protection, and machine guards.
Details safe practices for lifting, jacking, and using compressed air equipment in the workshop.
Covers safe usage of hand tools, power tools, and electrical equipment, including battery safety.
Advises on the safe use of cleaning fluids and solvents, checking labels for hazards.
Emphasizes clean workspace and fire prevention measures, including extinguisher use.
Covers operational safety, engine running precautions, and the importance of readily available first aid.
Provides guidance on safe service methods, proper repair procedures, and component cleaning for reliable operation.
Details safe practices for handling O-rings, hoses, tubes, bearings, shims, gaskets, seals, and bolts.
Emphasizes using correct tools, checking power tools for grounding, and disconnecting the battery.
Covers safety for welding, tractor disassembly, workshop cleanliness, and avoiding hanging loads.
Advises on safe engine operation in enclosed spaces, workshop smoking, loose clothing, and pre-start checks.
Provides standard torque values for inch fasteners based on grade and joint type.
Provides standard torque values for metric fasteners based on grade and joint type.
Offers conversion factors for area, pressure, speed, capacity, torque, volume, length, weight, power, and temperature.
Details how to identify a tractor using serial and engine numbers for service and parts ordering.
Lists engine model, cylinders, fuel filters, horsepower, displacement, bore, stroke, and cooling.
Covers clutch type, gearbox model, transmission type, gear shift, and differential lock for various models.
Provides speed ranges in kph and mph for the 8x2 gear box at different engine RPMs.
Provides speed ranges in kph and mph for the 8x8 gear box at different engine RPMs.
Details brake types, actuation, and parking brake mechanisms for the tractor models.
Outlines hydraulic pump type, output, spool valve, lower links, and lift capacity for the tractor.
Specifies PTO types, speed, shaft details, and output rotation for the tractor models.
Covers system voltage, starter motor type, alternator output, and lighting specifications.
Lists capacities for fuel tank, engine oil, cooling system, transmission, and axle differentials.
Details tire sizes, front axle type, and pod ratio for 4WD tractor models.
Provides overall length, width, height, wheelbase, ground clearance, and turning radii for 2WD models.
Provides overall length, width, height, wheelbase, ground clearance, and turning radii for 4WD models.
Specifies tractor weight with fluids for 2WD models.
Specifies tractor weight with fluids for 4WD models.
Lists tire locations, types, sizes, and pressures for various tractor models.
Provides tire load limits at various cold inflation pressures for different tire sizes and makes.
Lists specifications for coupler float and torque values for front support, engine to transmission, and transmission to center housing.
Details the procedure for splitting the tractor between the front axle and engine, including removal steps.
Provides the procedure for splitting the tractor between the engine and transmission, covering removal steps.
To Next Page