AgfaPhoto CC2700 - Power, Sound, and Frequency Settings

4. Press the / Down buttons to select the desired language from the
following
tions: English / French / German / S sh / Italian /
Portuguese / Dutch / Polish / Hungarian / Czech / Russian /
S
fied Chinese / Traditional Chinese / J se.
5. Finally
s the OK button to save and return to the vious menu.
6.2 Date and time setting
This setting allows you to set the date and time of the camcorder.
1. Press the Mode button to enter the set
mode and access the
settings menu.
2. Then
ss the / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the
/ Down buttons again to select "Date Setting" on the right.
5. Press the
/ Down buttons again to scroll through the data and then
the OK button to switch between "YY / MM / DD / h / min / sec".
6. Finally
s the OK button to save and return to the vious menu.
Note: it is also
ssible to activate or deactivate the dis y of the date
and time in the submenu of this setting.
6.3 Power save
This setting allows you to automatically turn off the camcorder after a few
moments if you do not use it anymore to save battery charge.
1. Press the Mode button to enter the set
mode and access the
settings menu.
2. Then
ss the / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the
/ Down buttons to select from the following tions:
1 min. / 3 min. / 5 min. / Off.
5. Finally
s the OK button to save and return to the vious menu.
6.4 Sound
This setting allows you to turn on / off the voice instructions of the
camcorder.
1. Press the Mode button to enter the set mode and access the
settings menu.
2. Then
ss the / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the
/ Down buttons to select from the following tions:
On / Off / Cancel.
17