AGH Deco OF1601 - Step 48: Drawer Front Adjustment

STEP 48
STEP 49
-Move unit to final location.
-Adjust drawer fronts as shown below.
Step1--Loosen screws on back of drawer front brackets as shown.
Step2--Position drawer front as required.
Step3--Tighten screws while holding drawer front in position.
STEP 1.
STEP 2.
®
STEP 3.
-Move unit to final location.
-Adjust drawer fronts as shown below.
Step1--Loosen screws on back of drawer front brackets as shown.
Step2--Position drawer front as required.
Step3--Tighten screws while holding drawer front in position.
STEP 1.
STEP 2.
®
STEP 3.