EasyManua.ls Logo

Agilaire 8872 - User Manual

Default Icon
163 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
Produced by Agilaire LLC
2904-B Tazewell Pike, Suite A
Knoxville, TN 37918
www.agilaire.com
info@agilaire.com
Support:
865-927-9440
support@agilaire.com
May 2017
8872 Manual

Table of Contents

Questions and Answers

  • K
    Kirk BenjaminAug 11, 2025
    How to troubleshoot no new data in Agilaire 8872?
    • M
      michaelgonzalezAug 11, 2025
      If no new data is appearing in the database or on the real-time display for your Agilaire Data Loggers, start by checking the Windows Service Manager (Start > Run > services.msc) to ensure that the Site Node Logger and Watchdog services are running. If they aren't running, attempt to manually start them. If the service fails to start, locate the Logs and email them to Agilaire. Also, review the ConfigError file in the Log Directory for any messages.
  • C
    corywestAug 21, 2025
    What to do if new data in Agilaire 8872 is marked as '0
    • K
      Kara OrtizAug 22, 2025
      If new data is appearing in your Agilaire Data Loggers, but all values are marked “0 Run > cmd to open a DOS window and try to ping each of the internal I/O modules at the IP addresses provided. If pinging fails for one module, inspect the internal Ethernet wiring for faults. If pinging fails for all modules, check the internal Ethernet switch for power indication and connection lights. If service fails, locate Logs and email to Agilaire. Also, review the ConfigError file in the Log Directory for any messages.
  • S
    Scott McgeeAug 30, 2025
    Why are some values marked '
    • L
      lawrence04Aug 30, 2025
      If new data is coming in, but some values are marked “ Channels > Modbus Instruments. The scan rates should be set to “30” unless you have received other instructions from Agilaire.

Agilaire 8872 Specifications

General IconGeneral
BrandAgilaire
Model8872
CategoryData Loggers
LanguageEnglish