Agilent Technologies 53131A - To Remove A5 DC Power Input Assembly (Option 002)

Chapter 3 Replacing Assemblies
To Remove A5 DC Power Input Assembly (Option 002)
Assembly-Level Service Guide 3-17
3
To Remove A5 DC Power Input Assembly
(Option 002)
1 Remove the cover.
See the section titled “To Remove the Cover” in this chapter.
2 Remove the four TORX 10 screws (H2) that attach A5 DC Power Input
Assembly to the side of the chassis as shown in Figure 3-11.
深圳德标仪器 135-1095-0799