406 Chapter10
Analyzer Options and Block Diagrams
Option Descriptions
TV Sync Trigger Capability/Fast Time-Domain
Sweeps and AM/FM Demodulator (Option 301)
For 8591E, 8593E, 8594E, 8595E, and 8596E only. Option 301 is a
combined option made of Options 101 and 102, allowing sweep times
down to 20 µs in zero span, enabling use of amplitude or frequency
demodulation, and allowing a demodulated signal to be listened to. See
Options 101 and 102 above for more detailed descriptions.
50Ω to 75Ω Matching Pad (Option 711)
For E-Series and L-Series spectrum analyzers. This option provides a
50Ω to 75Ω matching pad with dc block to be used on the analyzer
input. The pad has a frequency range of 1 MHz to 1.8 GHz. It adapts
your standard 50Ω analyzer to be compatible with a 75Ω system under
test.
Option 711 is also available as part number 0955-1020.
Reduced Frequency Accuracy (Option 713)
For 8590L only. Option 713 removes the built-in frequency counter from
your analyzer. This reduces the frequency accuracy of your
measurements.
Rack Mount Kit Without Handles (Option 908)
This option provides the parts necessary to mount the analyzer in an
System II cabinet or in a standard 19 inch (482.6 mm) equipment rack.
Option 908 is also available as a kit (part number 5062-4841).
Rack Mount Kit With Handles (Option 909)
Option 909 is the same as Option 908 but includes front handles for
added convenience.
Option 909 is also available as a kit (part number 5062-4840).
User's Guide and Calibration Guide (Option 910)
An additional copy of the 8590 E-Series and L-Series Spectrum
Analyzers User's Guide, the 8590 E-Series and L-Series Spectrum
Analyzers Quick Reference Guide, and the 8590 Series Analyzers
Calibration Guide of the appropriate model number for your analyzer,
are available as a set under Option 910.
To Next Page
Loading...
Need help?
General
