Agilent Technologies 8594E User Manual

Chapter 15 665
Service Equipment and Tools
Service Equipment and Tools
Table 15-3 Required Common Hand Tools
Description Part Number Use*
Hex (Allen) wrench, 3mm 8710-1392 R
Hex (Allen) wrench, 4mm 8710-1755 A,R
Hex (Allen) wrench, no. 4 5020-0288 R
Hex (Allen) wrench, no. 6 5020-0289 R
Nut driver, 7mm 8710-1217 R
Nut driver, 3/8 inch 8720-0005 R
Nut driver, 5/16 inch 8720-0003 R
Nut driver, 7/16 inch 8720-0006 R
Nut driver, 9/16 inch, drilled out, endcovered with heatshrink
tubing to protect front/rear-panel surface
8720-0008 R
Phillips Screwdriver, small no. 0 8710-0978 R
Pozidriv screwdriver, small no. 1 8710-0899 A,R
Pozidriv screwdriver, large no. 2 8710-0900 A,R
Long-nose pliers 8710-0003 R
Wire cutters 8710-0012 R
Wire strippers 8710-0058 R
* A = Adjustment, R = Replacement Procedure

Agilent Technologies 8594E Specifications

General

Brand	Agilent Technologies
Model	8594E
Category	Measuring Instruments
Language	English