Chapter 4
Front-Panel Key and SCPI Command Reference
Measurement keys
220
Front-Panel Key and SCPI Command
Reference
4.4.5.4.7 Fast Mode
Allows you to toggle the
Fast Mode between On and Off. Fast Mode can speed up the measurement.
4.4.5.4.8 FM Dev Only
Allows you to select only the results of FM deviation. When it is NO, you can get the results of FM deviation,
modulation rate, distortion, and sinad at the same time. When it is YES, you can only get the results of FM
deviation. All others will return
− 999, which can help to increase the speed of the measurement.
Key Path: Meas Setup
Remote Command: [:SENSe]:FMDeviation:FAST 0|1|OFF|ON
[:SENSe]:FMDeviation:FAST?
Default: OFF
State Saved: Saved in instrument state.
Range: ON|OFF
Example: :FMD:FAST ON
:FMD:FAST?
Key Path:
Meas Setup, More
Remote Command: [:SENSe]:FMDeviation:ONLY YES|NO
[:SENSe]:FMDeviation:ONLY?
Default: NO
State Saved: Saved in instrument state.
Range YES|NO
Example: :FMD:ONLY NO
:FMD:ONLY?
To Next Page
Loading...
Need help?
General
