218 Chapter 4
Instrument Functions: P - Z
Print
Instrument Functions: P - Z
4.3.2.2 Orientation
Allows you to select either
Portrait or Landscape printing. Landscape is not available with a
PCL3 (Deskjet) printer.
Key Path:
Print Setup
State Saved: Persistent, survives Preset and power cycle, but not saved in Instrument
State.
Factory Preset: Portrait
Remote Command:
:HCOPy:PAGE:ORIentation LANDscape|PORTrait
:HCOPy:PAGE:ORIentation?
Example: HCOP:PAGE:ORI LAND
4.3.2.2.1 Portrait Selects Portrait orientation for the printouts from the analyzer.
Key Path:
Print Setup, Orientation
Readback: Portrait
Remote Command:
See “Orientation” on page 218.
Example: HCOP:PAGE:ORI PORT
4.3.2.2.2 Landscape Selects Landscape orientation for the printouts from the analyzer.
Key Path:
Print Setup, Orientation
Readback: Landscape
Remote Command:
See “Orientation” on page 218.
Example: HCOP:PAGE:ORI LAND
To Next Page
Loading...
