3 Discrete
3.5 FET Id-Vd: MOSFET Id-Vd characteristics (A.01.20)
[Supported Analyzer]
B1500A, 4155B, 4155C, 4156B, 4156C
[Description]
Measures the drain current vs drain voltage characteristics of MOSFET.
[Device Under Test]
MOSFET, 3 terminals
[Device Parameters]
Polarity: Nch (SMUs force the specified value) or Pch (SMUs force the negative specified value).
Temp: Temperature
IdMax: Drain current compliance
[Test Parameters]
IntegTime: Integration time
Drain: SMU connected to Drain terminal, primary sweep voltage output
VdStart: Sweep start voltage for Drain terminal
VdStop: Sweep stop voltage for Drain terminal
VdStep: Sweep step voltage for Drain terminal
Gate: SMU connected to Gate terminal, secondary sweep voltage output
VgStart: Sweep start voltage for Gate terminal
VgStop: Sweep stop voltage for Gate terminal
VgStep: Sweep step voltage for Gate terminal
IgLimit: Gate current compliance
Source: SMU connected to Source terminal, constant voltage output
[Extended Test Parameters]
Vs: Source voltage
HoldTime: Hold time
DelayTime: Delay time
DrainMinRng: Minimum range for the drain current measurement
[Measurement Parameters]
Drain current Idrain
[X-Y Plot]
X axis: Drain voltage Vdrain (LINEAR)
Y1 axis: Drain current Idrain (LINEAR)
Agilent EasyEXPERT Application Library Reference, Edition 8
3-7
To Next Page
Loading...