6 Memory
Vs: Source voltage
IgLimit: Gate current compliance
HoldTime: Hold time
DelayTime: Delay time
PgAdd: GPIB address of pulse generator
BaseValue: Pulse base value
NoOfPulse: Number of output pulses
[Test Output: X-Y Graph]
X axis: Number of write/erase operation (LOG)
Y1 axis: Threshold voltage after write VthWrittenList (LINEAR)
Y2 axis: Threshold voltage after erase VthErasedList (LINEAR)
[Test Setup Details]
See NandFlash2 IV-Write-IV and NandFlash2 IV-Erase-IV.
Agilent EasyEXPERT Application Library Reference, Edition 8
6-14
To Next Page
Loading...