6 Memory
IgLimit: Gate current compliance
HoldTime: Hold time
DelayTime: Delay time
BaseValue: Erase pulse base value
PgAdd: GPIB address of pulse generator
NoOfPulse: Number of output pulses for the erase operation
[Measurement Parameters]
Drain current Idrain
[Analysis Function]
Vth=@L1X (X intercept of Line1)
[Auto Analysis]
Line1: Vertical line for Y1 at Idrain=Id@Vth
[Test Output: X-Y Graph]
X axis: Accumulated stress time StressTimeList (LOG)
Y1 axis: Threshold voltage Vth (LINEAR)
Agilent EasyEXPERT Application Library Reference, Edition 8
6-28
To Next Page
Loading...