6 Memory
BaseValue: Write pulse base value
DrainMinRng: Minimum range of drain current measurement
[Measurement Parameters]
Drain current Idrain
[Analysis Function]
Vth@Id=@L1X (X intercept of Line1)
[Auto Analysis]
Line1: Vertical line for Y1 at Idrain=Id@Vth
[X-Y Plot]
X axis: Gate voltage Vgate (LINEAR)
Y1 axis: Drain current Idrain (LOG)
[List Display]
Gate voltage Vgate
Drain current Idrain
[Test Output: X-Y Graph]
X axis: Number of write/erase cycles CycleList (LOG)
Y1 axis: Threshold voltage after write VthWrittenList (LINEAR)
Y2 axis: Threshold voltage after erase VthErasedList (LINEAR)
[Test Output: List Display]
Number of write/erase cycles CycleList
Threshold voltage after write VthWrittenList
Threshold voltage after erase VthErasedList
[Test Setup Details]
See NandFlash3 IV-Write-IV and NandFlash3 IV-Erase-IV.
TotalWriteAndEraseCycles should be 10, 100, 1000, 10000, 100000, or 1000000.
Agilent EasyEXPERT Application Library Reference, Edition 8
6-32
To Next Page
Loading...