Agilent Technologies EasyEXPERT

7 MixedSignal
PI=3.141592653589
Dval=Gval/(2*PI*FREQ*Cpval)
Rpval=1/Gval
Csval=(1+Dval^2)*Cpval
Xval=-1/(2*PI*FREQ*Csval)
Rsval=Dval*abs(Xval)
Zval=sqrt(Rsval^2+Xval^2)
Thetaval=atan(Xval/Rsval)
Vceval=Vcollector
[X-Y Graph]
To specify the device, A or B is added to the actual variable names.
X axis: Collector-Emitter voltage Vceval (LINEAR)
Y1 axis: Collector capacitance (parallel capacitance) Cpval (LINEAR)
Y2 axis: Conductance Gval (LINEAR)
[List Display]
To specify the device, A or B is added to the actual variable names.
Collector-Emitter voltage Vceval
Parallel capacitance Cpval
Conductance Gval
Series capacitance Csval
Series resistance Rsval
Parallel resistance Rpval
Dissipation factor Dval
Reactance Xval
Impedance Zval
Phase Thetaval
[Test Output: X-Y Graph]
X axis: Collector-Emitter voltage VceList (LINEAR)
Y1 axis: Collector capacitance (parallel capacitance) CpAList (LINEAR)
Y2 axis: Collector capacitance (parallel capacitance) CpBList (LINEAR)
Y3 axis: Differences between Cp DeltaCp (LINEAR)
Agilent EasyEXPERT Application Library Reference, Edition 8
7-4