Agilent Technologies EasyEXPERT

7 MixedSignal
Xval=-1/(2*PI*FREQ*Csval)
Rsval=Dval*abs(Xval)
Zval=sqrt(Rsval^2+Xval^2)
Thetaval=atan(Xval/Rsval)
[X-Y Graph]
To specify the device, A or B is added to the actual variable names.
X axis: DC bias Vport1 (LINEAR)
Y1 axis: MIM capacitance (parallel capacitance) Cpval (LINEAR)
Y2 axis: Conductance Gval (LINEAR)
[List Display]
To specify the device, A or B is added to the actual variable names.
DC bias Vport1
Parallel capacitance Cpval
Conductance Gval
Series capacitance Csval
Series resistance Rsval
Parallel resistance Rpval
Dissipation factor Dval
Reactance Xval
Impedance Zval
Phase Thetaval
[Test Output: X-Y Graph]
X axis: DC bias Vport1List (LINEAR)
Y1 axis: MIM capacitance (parallel capacitance) CpAList (LINEAR)
Y2 axis: MIM capacitance (parallel capacitance) CpBList (LINEAR)
Y3 axis: Differences between Cp DeltaCp (LINEAR)
Agilent EasyEXPERT Application Library Reference, Edition 8
7-34