Agilent Technologies EasyEXPERT

9 Organic
9.1 2-terminal dual IV sweep (A.05.03.2013.0124_2013.01.28.1)
[Supported Analyzer]
B1500A
[Description]
Measures the voltage vs. current characteristics of 2-terminal device by sweeping as follows.
Vstart =(with Vstep1)=> Vstop1 =(with Vstep1)=> Vstart =(with Vstep2) => Vstop2=(with Vstep2) => Vstart
[Device Under Test]
2-terminal device
[Device Parameters]
Temp: Temperature
[Test Parameters]
Port1: SMU for terminal1, sweep voltage output
Port2: SMU/GNDU for terminal2, 0 V output
Vstart: Sweep start voltage
Vstop1: Sweep stop1 voltage
Vstep1: Sweep step1 voltage
Vstop2: Sweep stop2 voltage
Vstep2: Sweep step2 voltage
IntegTime: Integration time
HoldTime: Hold time
DelayTime: Delay time
Compliance: Port1 current compliance
[Extended Test Parameters]
N/A
[Measurement Parameters]
Port1 measurement current I1
[User Function]
N/A
[Analysis Function]
N/A
[X-Y Plot]
X axis: V1: Port1 output voltage(LINEAR)
Y1 axis: I1: Port1 measurement current (LINEAR)
[List Display]
V1: Port1 output voltage
I1: Port1 measurement current
[Parameters Display Area]
N/A
[Auto Analysis]
N/A
[Note]
This measurement merges two double I/V sweep classic tests.
Agilent EasyEXPERT Application Library Reference, Edition 8
9-3