1 BJT
1.16 G-Plot ConstVce Pulse[3]: Ic-Vb characteristics, Vce=const, 3-terminal,
SMU Pulse (A.01.11)
[Supported Analyzer]
B1500A, 4155B, 4155C, 4156B, 4156C
[Description]
Measures the collector current vs base voltage characteristics. The SMU pulse is used for the Collector voltage
output.
[Device Under Test]
Bipolar transistor, 3 terminals
[Device Parameters]
Polarity: NPN (SMUs force the specified value) or PNP (SMUs force the negative specified value).
Le: Emitter length
We: Emitter width
Temp: Temperature
IcMax: Collector current compliance
[Test Parameters]
Base: SMU connected to Base terminal, primary sweep voltage output
VbStart: Sweep start voltage for Base terminal
VbStop: Sweep stop voltage for Base terminal
VbStep: Sweep step voltage for Base terminal
Collector: SMU connected to Collector terminal, constant voltage output
Vc: Collector voltage
PulsePeriod: Pulse period
PulseWidth: Pulse width
BaseValue: Pulse base value
Emitter: SMU connected to Emitter terminal, constant voltage output
[Extended Test Parameters]
Ve: Emitter voltage
HoldTime: Hold time
DelayTime: Delay time
[Measurement Parameters]
Collector current Icollector
[User Function]
IcPerArea=Icollector/Le/We
[X-Y Plot]
X axis: Base voltage Vbase (LINEAR)
Y1 axis: Collector current Icollector (LINEAR)
Agilent EasyEXPERT Application Library Reference, Edition 8
1-22
To Next Page
Loading...