14 SPGU_PLSDIV
LogFile: Absolute path name of the log file
LoopMax: Maximum loop count of measurement adjustment
LimitAbs: Limit when target voltage = 0 of measurement adjustment
LimitRate: Limit when target voltage != 0 of measurement adjustment
Damper: Damper coefficient of measurement adjustment
VbOption1: Select the SPGU1 base voltage will be Base1 or Peak1. (*3)
VbOption2: Select the SPGU2 base voltage will be Base2 or Peak2. (*3)
(*3) If you select 'Peak' for VbOption, the pulse base voltage is same as Peak, and the output waveform will be
kind of pseudo-DC bias.
Agilent EasyEXPERT Application Library Reference, Edition 8
14-4
To Next Page
Loading...