Agilent Technologies EasyEXPERT

15 Structure
Val=at(Buffer,1,1)
Val=Val/Lg/Wg*1E-12
I_gate@LowVgPerArea=storeAt(I_gate@LowVgPerArea,I,1,Val)
Buffer=getVectorData("IgatePerArea")
I_gatePerArea=storeAt(I_gatePerArea,I,1,at(Buffer,1,1))
I=I+1
[Test Output: X-Y Graph]
X axis: Gate voltage V_gate (LINEAR)
Y1 axis: Gate current I_gate (LOG)
Y2 axis: Gate current at pulse base voltage I_gate@LowVg (LOG)
[Test Output: List Display]
Gate voltage V_gate
Gate current I_gate
Gate current at pulse base voltage I_gate@LowVg
Gate current per Gate unit area I_gatePerArea
I_gate@LowVg per Gate unit area I_gate@LowVgPerArea
Agilent EasyEXPERT Application Library Reference, Edition 8
15-4