1 BJT
1.20 G-Plot Vbc=0V Pulse[3]: Ic-Ve characteristics, Vbc=0, 3-terminal, SMU
Pulse (A.01.11)
[Supported Analyzer]
B1500A, 4155B, 4155C, 4156B, 4156C
[Description]
Measures the collector current vs emitter voltage characteristics. The SMU pulse is used for the Emitter
voltage output.
[Device Under Test]
Bipolar transistor, 3 terminals
[Device Parameters]
Polarity: NPN (SMUs force the specified value) or PNP (SMUs force the negative specified value).
Le: Emitter length
We: Emitter width
Temp: Temperature
IcMax: Collector current compliance
[Test Parameters]
Base: SMU connected to Base terminal, constant voltage output
Collector: SMU connected to Collector terminal, constant voltage output
Emitter: SMU connected to Emitter terminal, primary sweep voltage output
VeStart: Sweep start voltage for Emitter terminal
VeStop: Sweep stop voltage for Emitter terminal
VeStep: Sweep step voltage for Emitter terminal
PulsePeriod: Pulse period
PulseWidth: Pulse width
[Extended Test Parameters]
BaseValue: Pulse base value
Vb: Base voltage
Vc: Collector voltage
HoldTime: Hold time
DelayTime: Delay time
[Measurement Parameters]
Collector current Icollector
[User Function]
IcPerArea=Icollector/Le/We
[X-Y Plot]
X axis: Emitter voltage Vemitter (LINEAR)
Y1 axis: Collector current Icollector (LINEAR)
Agilent EasyEXPERT Application Library Reference, Edition 8
1-26
To Next Page
Loading...