Agilent Technologies EasyEXPERT

15 Structure
Reactance X=-1/(2*PI*Freq*Cs)
Series resistance Rs=D*abs(X)
Impedance Z=sqrt(Rs^2+X^2)
Phase Theta=atan(X/Rs)
[X-Y Plot]
X axis: Frequency Freq (LOG)
Y1 axis: Junction capacitance (parallel capacitance) Cp (LINEAR)
Y2 axis: Conductance G (LINEAR)
[List Display]
Frequency Freq
Anode voltage Vanode
Junction capacitance (parallel capacitance) Cp
Conductance G
Series capacitance Cs
Series resistance Rs
Parallel resistance Rp
Dissipation factor D
Reactance X
Impedance Z
Phase Theta
[Test Output: X-Y Graph]
X axis: Frequency list FreqList (LOG)
Y1 axis: Gate capacitance (parallel capacitance) list CpList (LINEAR)
Y2 axis: Conductance list GList (LINEAR)
[Test Output: List Display]
Frequency FreqList
Anode voltage VaList
Gate capacitance (parallel capacitance) CpList
Conductance GList
Series capacitance CsList
Series resistance RsList
Parallel resistance RpList
Dissipation factor DList
Reactance XList
Impedance ZList
Phase ThetaList
Agilent EasyEXPERT Application Library Reference, Edition 8
15-13