EasyManua.ls Logo

Agilent Technologies EasyEXPERT

Agilent Technologies EasyEXPERT
610 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19 WGFMU_IV
19.4 WGFMU Id-Vg (DC) (A.05.03.2013.0124_2013.03.26.1)
[Supported Analyzer]
B1500A
[Description]
Measures the drain current vs gate voltage characteristics of MOSFET using WGFMU
[Device Under Test]
MOSFET
[Device Parameters]
Lg: Gate Length
Wg: Gate Width
Temp: Temperature
[Test Parameters]
Period: Pulse period
Drain: WGFMU connected to Drain, secondary sweep voltage output
VdStart: Sweep start voltage for Drain
VdStop: Sweep stop voltage for Drain
VdStep: Sweep step voltage for Drain
Gate: WGFMU connected to Gate, primary sweep voltage output
VgStart: Sweep start voltage for Gate
VgStop: Sweep stop voltage for Gate
VgStep: Sweep step voltage for Gate
MeasRange: Measurement range for drain current
RiseTime: Rise time of each step
Hold: Hold time
MeasDelay: Measurement delay time
AveragingTime: Measurement averaging time
[Extended Test Parameters]
DataDisplay_PatternValidation : PatternValidation data display mode (Not effective for Pattern Validation
mode)
Disable (does not display PatternValidation data during measurement)
Enable_Waveform_MeasTiming (displays Waveform and MeasTiming during measurement)
ExecutionMode: Execution mode
Run Vector: Performs the waveform output and measurement
Pattern Validation: Displays the waveform and measurement
[Measurement Parameters]
Id: Drain current
[X-Y Plot]
X axis: Vg, Gate voltage (LINEAR)
Y1 axis: Id, Drain current (LINEAR)
[List Display]
Vg, gate voltage
Agilent EasyEXPERT Application Library Reference, Edition 8
19-8

Related product manuals