22 IGBT
22.6 Ic-Vce: IGBT Ic-Vce characteristics, SMU Pulse (A.05.00)
[Supported Analyzer]
B1505A
[Description]
Measures Ic-Vce characteristics. SMU pulse is used for the Collector-Emitter voltage output.
[Device Under Test]
IGBT, 3 terminals
[Device Parameters]
Polarity: Nch (SMUs force the specified value) or Pch (SMUs force the negative specified value).
Temp: Temperature
[Test Parameters]
Memo: Memorandum
Collector: SMU connected to Collector terminal, primary sweep voltage output
VcStart: Sweep start voltage for Collector terminal
VcStop: Sweep stop voltage for Collector terminal
VcLinearStep: Sweep step voltage for Collector terminal, effective if Scale=LINEAR
PulsePeriodMode: Pluse period mode, AUTO or MANUAL
ManualPulsePeriod: Pulse period, effective if PulsePeriodMode=MANUAL
PulseWidth: Pulse width
Gate: SMU connection to Gate terminal, secondary sweep voltage output
VgStart: Sweep start voltage for Gate terminal
VgStop: Sweep stop voltage for Gate terminal
VgStep: Sweep step voltage for Gate terminal
Emitter: GNDU connected to Emitter terminal
Scale: Scale of sweep, LINEAR, LOG10, LOG25, or LOG50
IcLimit: Collector current compliance
PcLimit: Collector power compliance
[Extended Test Parameters]
PulseBase: Pulse base voltage
PulseAvgCnt: Pulse averaging count
IgLimit: Gate current compliance
VcLimit: Collector voltage compliance (applicable to UHCU/HVMCU/UHVU)
HoldTime: Hold time
IcZero: Y axis (Ic) minimum value
MeasurementTime: Actural measurement time for a pulse period
[Measurement Parameters]
Collector current Icollector
Gate current Igate
[User Function]
Ta: Temperature Ta=Temp
[X-Y Plot]
For Scale=LINEAR:
X axis: Collector voltage Vcollector (LINEAR)
Y axis: Collector current Icollector (LINEAR)
Agilent EasyEXPERT Application Library Reference, Edition 8
22-13