EasyManua.ls Logo

Agilent Technologies EasyEXPERT

Agilent Technologies EasyEXPERT
610 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22 IGBT
22.12 Vce-Vge: IGBT Vce-Vge characteristics, SMU Pulse (A.05.00)
[Supported Analyzer]
B1505A
[Description]
Measures Vce-Vge characteristics. SMU pulse is used for the Collector current output.
[Device Under Test]
IGBT, 3 terminals
[Device Parameters]
Polarity: Nch (SMUs force the specified value) or Pch (SMUs force the negative specified value).
Temp: Temperature
[Test Parameters]
Memo: Memorandum
Gate: SMU connected to Gate terminal, primary sweep voltage output
VgStart: Sweep start voltage for Gate terminal
VgStop: Sweep stop voltage for Gate terminal
VgStep: Sweep step voltage for Gate terminal
PulsePeriodMode: Pluse period mode, AUTO or MANUAL
ManualPulsePeriod: Pulse period, effective if PulsePeriodMode=MANUAL
PulseWidth: Pulse width
Collector: SMU connected to Collector terminal, secondary sweep current output
IcStart: Sweep start current for Collector terminal
IcStep: Sweep current step for Collector terminal
IcPoint: Number of collector current sweep steps
Emitter: GNDU connected to Emitter terminal
VcLimit: Collector voltage compliance
PcLimit: Collector power compliance
[Extended Test Parameters]
PulseBase: Pulse base current
PulseAvgCnt: Pulse averaging count
IgLimit: Gate current compliance
VcStop: Sweep stop Collector voltage (applicable to UHCU/HVMCU/UHVU)
HoldTime: Hold time
MeasurementTime: Actural measurement time for a pulse period
VceScale: Graph scale option for Vce
VceZero: Log scale minimum value for Vce
[Measurement Parameters]
Collector voltage Vce
Gate current Ig
[User Function]
Ta: Temperature Ta=Temp
[X-Y Plot]
X axis: Gate voltage Vge (LINEAR)
Y1 axis: Collector voltage Vce (LINEAR/LOG)
[List Display]
Agilent EasyEXPERT Application Library Reference, Edition 8
22-25

Related product manuals