Agilent Technologies EasyEXPERT

2 CMOS
Frequency Frequency=Freq
Dissipation factor D=G/(2*PI*Freq*Cp)
Parallel resistance Rp=1/G
Series capacitance Cs=(1+D^2)*Cp
Reactance X=-1/(2*PI*Freq*Cs)
Series resistance Rs=D*abs(X)
Impedance Z=sqrt(Rs^2+X^2)
Phase Theta=atan(X/Rs)
[X-Y Plot]
X axis: Frequency Freq (LOG)
Y1 axis: Gate-Substrate capacitance (parallel capacitance) Cp (LINEAR)
Y2 axis: Conductance G (LINEAR)
[List Display]
Frequency Freq
Gate-Substrate capacitance Cp
Series capacitance Cs
Series resistance Rs
Parallel resistance Rp
Dissipation factor D
Reactance X
Impedance Z
Phase Theta
Substrate voltage Vsubs
Conductance G
[Test Output: X-Y Graph]
X axis: Frequency list FreqList (LOG)
Y1 axis: Gate-Substrate capacitance (parallel capacitance) list CpList (LINEAR)
Y2 axis: Conductance list GList (LINEAR)
[Test Output: List Display]
Frequency FreqList
Gate-Substrate capacitance (parallel capacitance) CpList
Conductance GList
Series capacitance CsList
Series resistance RsList
Parallel resistance RpList
Dissipation factor DList
Reactance XList
Impedance ZList
Phase ThetaList
Substrate voltage VsubsList
Agilent EasyEXPERT Application Library Reference, Edition 8
2-9