Agilent Technologies EasyEXPERT - Page 73

2 CMOS
[User Function]
PI=3.141592653589
D=G/(2*PI*FREQ*Cp)
Rp=1/G
Cs=(1+D^2)*Cp
X=-1/(2*PI*FREQ*Cs)
Rs=D*abs(X)
Z=sqrt(Rs^2+X^2)
Theta=atan(X/Rs)
Subs=Vstart*Polarity
[Display Setup: X-Y Graph]
X axis: Gate voltage Vgate (LINEAR)
Y1 axis: Gate-Substrate capacitance (parallel capacitance) Cp (LINEAR)
Y2 axis: Conductance G (LINEAR)
[Display Setup: List Display]
Substrate voltage Subs
Gate voltage Vgate
Gate-Substrate capacitance (parallel capacitance) Cp
[Test Output: X-Y Graph]
X axis: Gate voltage VgList (LINEAR)
Y1 axis: Gate-Substrate capacitance (parallel capacitance) CpList (LINEAR)
Y2 axis: Conductance GList (LINEAR)
[Test Output: List Display]
Gate voltage VgList
Gate-Substrate capacitance (parallel capacitance) CpList
Conductance GList
Series capacitance CsList
Series resistance RsList
Parallel resistance RpList
Dissipation factor DList
Reactance XList
Impedance ZList
Phase ThetaList
Agilent EasyEXPERT Application Library Reference, Edition 8
2-11