Agilent Technologies EasyEXPERT - Page 79

2 CMOS
[User Function]
PI=3.141592653589
D=G/(2*PI*FREQ*Cp)
Rp=1/G
Cs=(1+D^2)*Cp
X=-1/(2*PI*FREQ*Cs)
Rs=D*abs(X)
Z=sqrt(Rs^2+X^2)
Theta=atan(X/Rs)
Vgate=-Vsource
[Display Setup: X-Y Graph]
X axis: Gate voltage Vgate (LINEAR)
Y1 axis: Gate-Channel capacitance (parallel capacitance) Cp (LINEAR)
Y2 axis: Conductance G (LINEAR)
[Display Setup: List Display]
Gate voltage Vgate
Substrate voltage Vsubs
Gate-Channel capacitance (parallel capacitance) Cp
Conductance G
[Test Output: X-Y Graph]
X axis: Gate voltage VgList (LINEAR)
Y1 axis: Gate-Channel capacitance (parallel capacitance) CpList (LINEAR)
Y2 axis: Conductance GList (LINEAR)
[Test Output: List Display]
Gate voltage VgList
Channel-Substrate voltage VbsList
Gate-Channel capacitance (parallel capacitance) CpList
Conductance GList
Series capacitance CsList
Series resistance RsList
Parallel resistance RpList
Dissipation factor DList
Reactance XList
Impedance ZList
Phase ThetaList
Agilent EasyEXPERT Application Library Reference, Edition 8
2-17