Agilent Technologies Infiniium DCA User Manual

2-7
Sample Programs
C Programming Examples
xorg = atof (xorg_str);
write_IO (":WAVeform:XREFerence?");
bytes_read = read_IO (xref_str,32L);
xref = atof (xref_str);
write_IO (":WAVeform:YINCrement?");
bytes_read = read_IO (yinc_str,32L);
yinc = atof (yinc_str);
write_IO (":WAVeform:YORigin?");
bytes_read = read_IO (yorg_str,32L);
yorg = atof (yorg_str);
write_IO (":WAVeform:YREFerence?");
bytes_read = read_IO (yref_str,32L);
yref = atof (yref_str);
write_IO (":WAVeform:DATA?"); /* request waveform data */
bytes_read = read_IO (data,1L); /* ignore leading # */
bytes_read = read_IO (header_str,1L); /* input byte counter */
header_length = atoi (header_str);
/* read number of points - value in bytes */
bytes_read = read_IO (header_str,(long)header_length);
Acquired_length = atoi (header_str); /* number of bytes */
bytes_read = read_IO (data,Acquired_length); /* input waveform data */
bytes_read = read_IO (&term,1L); /* input termination character */
} /* end transfer_data ( ) */
/*
* Function name: convert_data
* Parameters: none
* Return value: none
* Description: This routine converts the waveform data to time/voltage
* information using the values that describe the waveform. These values are
* stored in global arrays for use by other routines.
*/
void convert_data ( )
{
int i;
for (i = 0; i < Acquired_length; i++)
{
time_value[i] = ((i - xref) * xinc) + xorg; /* calculate time info */
volts[i] = ((data[i] - yref) * yinc) + yorg; /* calculate volt info */
}
} /* end convert_data ( ) */
/*
* Function name: store_csv
* Parameters: none

Agilent Technologies Infiniium DCA Specifications

General

Brand	Agilent Technologies
Model	Infiniium DCA
Category	Test Equipment
Language	English