2-13
Sample Programs
C Programming Examples
fprintf (fp,"Error string:%s\n", error_str );
if ( error_str[0] == '0' )
{
/* Clear event registers and queues,except output */
write_IO("*CLS");
more_errors = FALSE;
if ( fp != NULL)
fclose ( fp );
}
for (i=0;i<64;i++) /* clear string */
error_str[i] = '\0';
} /* end while (more_errors) */
}
else
{
printf (" SRQ not generated by scope.\n "); /* scope did not cause SRQ */
}
srq_asserted = check_SRQ ( ); /* check for SRQ line status */
}/* end while ( srq_asserted ) */
}/* end srq_handler */
Learn String Example
File: learnstr.c
/* learnstr.c */
/*
* This example program initializes the Agilent 86100 scope, runs autoscale to
* acquire a signal, queries for the learnstring, and stores the learnstring
* to disk. It then allows the user to change the setup, then restores the
* original learnstring. It assumes that a signal is attached to the scope.
*/
#include <stdio.h> /* location of: printf ( ), fopen ( ), fclose ( ), fwrite ( ),getchar */
#include "hpibdecl.h"
void initialize ( );
void store_learnstring ( );
void change_setup ( );
void get_learnstring ( );
void main ( void )
{
To Next Page
Loading...
Need help?
General
