6
4.7. In DAB mode, the radio will sync station time and date (presupposes
activation of “station searched”.
5. FM mode
5.1 Turn on the radio, the display will show “Welcome to Digital Radio”, then
turn into FM mode at 87.50MHz.
5.2. To search stations manually, turn ”Tun+/- ” to adjust a station at frequency
increments of 0.05MHz.
5.3. Press ” Scan/Dimmer “ to automatically search stations (to higher
frequencies), if a signal is received, the radio will stop and play this station.
You can also press and hold the “Scan/Dimmer” button to search station
towards lower frequencies, if a signal is received, the radio will stop and
play this station.
5.4. Press and hold ”Preset”, and the display will show “Preset XX Save”, turn
”Tun+/- to choose the station you want to save, then press ”Enter”, and the
display will show ”Saved XX” and go back to play status, the total save
capacity is 10 stations.
Please note: XX in ”Saved XX” will mean the preset station numbers, which
run from 01 to10.
5.5. If you want to listen to saved stations, press ”Preset”, turn”Tun+/-“ to choose
preset stations, then press ”Enter” to start playing.
5.6. When playing FM stations, press ”Info” repeatedly to check RDS Radio Text,
program type, frequency, date, time etc. The content shown on the display
will vary and be based on the respective stations.
5.7. The default audio mode for all stations is stereo. If the station signal is weak
this will influence the sound quality. In this situation, press ”enter” to switch
between “Mono” and ”Auto” to improve the sound quality.
6. Factory reset
When the unit is on (in DAB or FM mode), press and hold ”Mode”, the
display will then display the message “Press Enter Key To Reset”. If you
press ”Enter” to reset, the LCD display will then show ”System Reset”. Once
reset, all previously saved stations will be removed.
To Next Page
Loading...
