GENERAL INFORMATION
Thank you for buying the EAGL laser. Although it is very simple to use, we recommend
that you read this manual before operating the laser.
Specifications
Operating range EAGL 2000: 2,000 ft. (600m) diameter
EAGL 3000S: 3,000 ft. (900m) diameter
Self-leveling range ± 4˚ (± 7%)
Accuracy Better than ±1/16” @ 100’ (± 4mm/100m)
± 8 arc seconds
H.I. Alert Laser shut-off; user chooses mode as desired
Windy mode Reduces sensitivity; does not change accuracy
Matching slope EAGL 3000S only:
± 6% manual slope in X axis; Y axis is self-leveling
Rotation speed 600 rpm
Beam type/output Infrared diode; 785nm; 1.0mW; Class 1
Power sources (1) 4 “D” size alkaline battery pack
(2) optional NiCd rechargeable battery pack
(3) AC charger with optional NiCd battery pack
Battery life Approximately 100 hours (alkaline)
40 hours (NiCd)
Mounting base 5/8” x 11 flat or domed
Water resistance IP55
Operating temperature 14º to 122º F (-10º to
Storage temperature -4˚ to 140˚ F (-20˚ to 60˚ C)
50º C)
Dimensions 8” h x 6.5” w x 6” d (20 x 16 x 15cm)
5 lbs. (2.3kg)
2
Detector Specifications
Working radius Up to 1,500 ft. (450m)
Beam reception range ± 45°
Beam window height 2” (50 mm)
Detection accuracy Fine: ~ ±1/32” (± 1 mm)
Medium: ~ ±1/16” (± 2 mm)
Wide: ~ ±1/8” (± 3 mm)
Display channels 11 on LCD; 5 with LEDs
Power supply 2 AA alkaline batteries
Battery life 70+ hours with LEDs off
50+ hours with LEDs on
Operating temperature -4° F to 140° F (-20° C to 60° C)
Storage temperature -40° F to 158° F (-40° C to 70° C)
Automatic shut-off 30 minutes / no use
Strobe rejection Detector does not respond to strobe
Environmental Waterproof (IP67)
Weight (with batteries) 1 lb. with clamp (0.45 kg)
Dimensions (HxWxD) 6.4 x 2.9 x 1.14 in.
(163 x 74 x 29 mm)
*Specifications subject to change without notice.
11
AGL Limited Warranty
EXPRESS WARRANTY FOR HARDWARE. AGL Corporation (“AGL”) warrants to the original end user (“Customer”)
that this Product will be free from defects in workmanship and materials, under normal use, for
two
(2) years and
non-AGL-manufactured products for which ninety (90) days shall apply, unless such warranty period has been extended
by AGL, and provided any and all operating and maintenance instructions are strictly respected, in particular in case of
extreme and/or continuous applications/use of the Product. The warranty period begins on the proved purchase date, or
if applicable, date of delivery or date of acceptance report. AGL’s sole obligation under this express warranty shall be, at
AGL’s sole option and expense, to replace or repair the Product or part, or refund the purchase price paid for the Product.
AGL warrants any repaired or replaced Product or part for a period of ninety (90) days from shipment, or through the end
of the original warranty, whichever is longer. All Products or parts that are replaced become the property of AGL. This
express warranty does neither cover consumables, such as batteries, bulbs and fuses, nor third party products.
OBTAINING WARRANTY SERVICE. Customer must contact an authorized service center of AGL or AGL’s Service Center
within the applicable warranty period to obtain warranty service authorization. Dated proof of original purchase from
AGL’s authorized distributor and a description of the defect will be required. AGL is not responsible for Products or parts
received without a warranty service authorization. Repaired or replacement Products will be shipped to Customer at AGL’s
expense. The repaired product or part will be shipped as soon as reasonably possible. AGL shall not be responsible for any
damages occurring during such shipment. For Products forming part of a fixed installation, such place of performance shall
be the site of such installation and AGL shall have the right to charge for additional costs for such services under warranty
if the site of the Product is other than where the Product was originally shipped or installed.
CONTINUED ON BACK PAGE.
To Next Page
Loading...
