6
SIM Tips：
This means that you cannot use both SIM cards for calls or data services
simultaneously.
The supports dual SIM dual standby but single pass. AGM G2
2. Nano-SIM and Micro SD card socket can only be used for either Nano-SIM
or Micro SD card. Place the Nano-SIM vertically or place Micro SD card
horizontally.
3. Make sure the cards are correctly aligned and the tray is level before
inserting it into the phone.
Installing the SIM and Micro SD card:
1. Take off the SIM/SD tray waterproof rubber cover and use your finger or the
metal ejector pin provided to open the SIM tray.
2. Pull out the SIM tray.
3. Place Nano-SIM in inside position.
Micro SD Tips:
1. Do not remove the Micro SD card while using the phone, as the card may be
damaged. AGM will not be held responsible for any subsequent data loss or
card damage resulting from this action.
2. Power off the phone before installing or removing the Micro SD card.
3. Please note that AGM does not provide Micro SD cards.
4. SIM card adapter. A cut SIM card or any other non-standard cards are not
allowed. Those non-standard cards may not be recognized by the phone and
can damage the tray.
4. Place Nano-SIM or Micro SD card in outside position.
5. Make sure that the Nano-SIM and Micro SD card metal contact parts are
facing down and that the cut corner aligned with tray in the correct position as
per the diagram shown above.
1. * For some versions, does not support 2 SIM cards data services AGM G2
working together. When inserting 2 SIM cards, you can only choose one of the
2 SIM cards to use 5G services.
PREPARING TO INSTALL THE SIM/MICRO SD CARD
To Next Page
Loading...