21
BOOST button
There is a red boost button on the left handlebar. Use this button when you need to
accelerate rapidly. You can also use this button independently of PAS up to 6 kmh
(walking mode).
Lights control
Press and hold button "light" for 2 seconds. Display backlight and front and rear
lights will be activated. When you press and hold it for 2 seconds again, all lights will
go off. There is light sensor in display so you can enjoy automatic lights function
when day light conditions are bad.
User setting
You can adjust some of ebike parametres. Double click "i" (mode) to get into setting.
Each parameter you can adjust by "up" and "down" button. Use "i" to switch between
paramatres. To save and exit setting double click "i" again.
You can set following parametres:
tC - trip clearance. To reset trip set parameter to y.
S7 - choice between metric or royal units.
To Next Page
Loading...