Completed work
Another section has been added to
the hull and the superstructure deck
has grown.
03
01
C1
C2
C3
PB
2303
2303
Carefully turn the deck pieces over, making sure you
do not damage any of the parts already fitted. Ensure
the overlap remains in place.
Fix the two deck pieces together from below using
three PB 2 x 5 mm black screws.
Turn the assembled superstructure deck right side up.
Remove platform C1 and box C2 from frame 23-04.
Make sure you do not cut the locating pins off part C1.
Use a little superglue to fix the parts on the port side
of the superstructure deck section 23-03 as shown.
03. DETAILS FOR THE WALLS OF THE SUPERSTRUCTURE DECK
04
02
Remove part C3 from the frame 23-04 and use
a little superglue to fix it to the starboard side of the
superstructure deck section 23-03 as shown.
12
12
AGORAMODELS BISMARCK
PB
AGORAMODELS BISMARCK
To Next Page
Loading...