Agora Bismarck - Page 18

2503
2401
2503
2503
2401
02. FITTING THE LIFEBOUYS
Carefully cut the two lifebuoys from the
plastic frame 25-03. Place the deck
construction from the previous stage on
your work top with the starboard side
facing you. Identify the fixing point for
the first lifebuoy, indicated by the arrow.
Fit the pegs on the lifebuoy into the
holes in the wall of the deck (inset).
Turn the deck around and fit the second
lifebuoy to the port side wall, directly
opposite the first lifebuoy.
01
02
Completed work
As well as extending the hull, further
details have been added to the
superstructure deck, as shown here.
18
18
AGORAMODELS BISMARCK
PB
AGORAMODELS BISMARCK